Franklin FULLSCRUB™ Floor Cleaner

Fullscrub® Cleaner/Degreaser is a great all around cleaning product. Its unique formulation is excellent for use in all types of equipment.

Can be used in walk-behind automatic scrubbers, riding scrubbers, high pressure sprayers, steam equipment, pump-up and hand held sprayers. Safe non-butyl formula.

Fullscrub® Cleaner/Degreaser is recommended for use in schools, hotels, hospitals, factories, machine shops, trucking terminals, automotive repair facilities, etc. Excellent on trouble spots where accumulation of grease and grime are a problem. Fullscrub® works well in hot or cold water. Dilute according to application and soilage conditions.

Franklin Products: minimum purchase of $200 

Please contact us for a shipping quote.

Product Specifications

pH – 9.0 ± 0.3

Appearance – Clear Green Thin Liquid

Fragrance – None

Freezing Point – About 32°F

Solubility in Water – Complete

Flash Point – None to boiling

Directions for Use

Autoscrub Cleaning 

1. Dilute 1/2 ounce per gallon (1:256 ratio) in water for light soilage or dilute 2 ounces per gallon (1:64 ratio) in water for heavy soilage.
2. Clean: Scrub with red pad. Apply Fullscrub®, scrub and pick up in one operation. Rinsing not required.
3. Pick up trails: Use clean water and mop/bucket to pic up any trails left from autoscrubber.

Damp Mopping

1. Dilute 1 ounce per gallon (1:128 ratio) in water for light soilage or dilute 4 ounces per gallon (1:32 ratio) in water for heavy soilage.
2. Clean: Use a clean mop and damp mop the floor. Change the cleaning solution frequently.
3. Rinse with clean, hot potable water. Squeegee excess water into a drain or pick up with a wet/dry vacuum.

General Cleaning

1. Dilute 1 ounce per gallon (1:128 ratio) in water for light soilage or dilute 4 ounces per gallon (1:32 ratio) in water for heavy soilage.
2. Apply: Spray or apply with a sponge, cloth or brush.
3. Wipe dry.

Product PDF's

Product Label

Safety Data Sheet

Technical Data Sheet