Coder verifies print on flexible packaging to avoid waste and recalls
Detect-Plus, an add-on module for SmartDate thermal transfer overprinter coders, verifies the presence, position, and quality of codes printed directly on film packaging. From Markem-Imaje, it can be purchased new with or retrofitted to SmartDate X40 or X60 coders.
By checking codes on the flexible film packaging itself, the technology helps users avoid costly product recalls and material waste (both product and packaging waste). The module checks the printed information on each pack to ensure codes are present and properly placed. Competitive ribbon check systems can tell if a code has been printed, but not if it is misplaced or completely absent.
The print-and-detect system fits easily into most medium- to high-volume packaging lines. When paired with the SmartDate X60, it can confirm the quality of up to 350 packs per minute, at 300 dots per inch. The plug-and-play module does not require additional hardware or software to install. After installation, the user interface engages with the camera to check code conformity on the pack. A warning sounds if a fault occurs, alerting the operator to needed adjustment.